Malformed Objects In I386 Ipp Library For Mac

1. Malformed Objects In I386 Ipp Library For Mac
2. Malformed Objects In I386 Ipp Library For Mac Download
3. Ipp Library

. HippoDraw can be built from source as either a X11 or native (Cocoa) application.

It depends on whether the Qt library you use was built with X11 or native windows. In either case either Qt 3 or Qt 4 can be used. Since HippoDraw is a cross-platform application built with Qt support, There are some special precautions and steps that need to be taken on the Mac OS X platform. This page collects these steps that are particular to that platorm.

Of course, a build can fail in ways it fails on other Unix like systems as well. See for appropriate notes. The first decision is whether you want to build HippoDraw as a native (Cocoa) or as a X11 application. If X11, one can get pre-built Qt binaries from. With this release, fink has Qt-3.3.4 built with gcc 3.3. See for information on building HippoDraw with same version of gcc. If you want a native (Cocoa) version of HippoDraw, than you'll first need to build and install a version of Qt.

The is available from Trolltech's web page. Older versions can be fround on the ftp.trolltech.com server. You can choose between Qt 3 and Qt 4. The installation is sligthly different and described in the following sections. Building Qt 3 from source is fairly easy and the instructions in Qt's INSTALL file work.

However, one needs to add at least one option to the configure command. HippoDraw requires Qt with thread support if it is to be used as Python extension module. A typical build of Qt 3 is thus. ln -sf $QTDIR/lib/libqt-mt.3.dylib /usr/lib ln -sf $QTDIR/lib/libqui.1.dylib /usr/lib The installationo procedure for Qt 4 has more support for the Mac OS X system then with Qt 3. As describled in the Qt 4 INSTALL file, QT 4 is built by default as a Mac OS framework. Using frameworks would make HippoDraw's Makefiles incompatible with other UNIX platforms. Thus development of HippoDraw on the Mac is done without Qt as a framework.

For the build of Qt 4, HippoDraw developers used the following configure command. configure -qt-gif -no-framework -universal -sdk /Developer/SDKs/MacOSX10.5.sdk -release Note in the above configure example we built Qt as universal binaries. Also we found that the -release is necessary otherwise QT is built with both release and debug versions. Once a version of Qt has been installed, HippoDraw builds on the Mac like it builds on any other Unix-like system. See for more information.

However, some of the optional external libraries have minor problems on Mac OS X for various reasons. They are discussed below. Installing the optional version 4.2 has the following compilation errors on Mac OS X 10.4.6. Gcc -DHAVECONFIGH -g -O2 -c wcsulex.c In file included from lex.wcsulex.c:8848: /usr/include/unistd.h:441: error: conflicting types for 'read' lex.wcsulex.c:8523: error: previous implicit declaration of 'read' was here make2:. wcsulex.o Error 1 gcc -DHAVECONFIGH -g -O2 -c wcsutrn.c In file included from lex.wcsutrn.c:5103: /usr/include/unistd.h:441: error: conflicting types for 'read' lex.wcsutrn.c:4793: error: previous implicit declaration of 'read' was here make2:.

wcsutrn.o Error 1 make2: Target `lib' not remade because of errors. Make1:./C/libwcs-4.2.a Error 2 The problems appears to be that files wcsulex.c and wcsutrn.c were generated by a flex incompatible with the unistd.h file on Darwin. The fix is to touch the files wcsulex.l and wcsutrn.l to change their file dates.

Then when you issue make, the Darwin flex will be used to reproduce these files and they can compile. But you're not done yet. Make install fails like this. sudo make install Password: make -k -C pgsbox install fc -I./FORTRAN -c -o pgsbox.o pgsbox.f /usr/bin/fc: line 4: fc: -I: invalid option fc: usage: fc -e ename -nlr first last or fc -s pat=rep cmd make1:.

pgsbox.o Error 2 fc -I./FORTRAN -c -o pgcrfn.o pgcrfn.f /usr/bin/fc: line 4: fc: -I: invalid option fc: usage: fc -e ename -nlr first last or fc -s pat=rep cmd make1:. pgcrfn.o Error 2 make1: Target `install' not remade because of errors.

Make:. install Error 2 The configure script thought there was a Fortran compiler available because it found /usr/bin/fc, the script to drive f2c as a Fortran compiler. But f2c is not in Darwin. The fix to this problem is. cd C sudo make install Password: /usr/bin/install -c -d -m 2755 /usr/local/lib /usr/bin/install -c -m 644 libwcs-4.2.a /usr/local/lib rm -f /usr/local/lib/libwcs.a ln -s /usr/local/lib/libwcs-4.2.a /usr/local/lib/libwcs.a /usr/bin/install -c -d -m 2755 /usr/local/include/wcslib-4.2 /usr/bin/install -c -m 444 CHANGES /usr/local/include/wcslib-4.2/CHANGESC /usr/bin/install -c -m 444.h /usr/local/include/wcslib-4.2 rm -f /usr/local/include/wcslib ln -s /usr/local/include/wcslib-4.2 /usr/local/include/wcslib That is go to the C directory and issue make install there.

But you're still not done. Notice in the above, that ranlib wasn't run on the installed static library. So the last step is. sudo ranlib /usr/local/lib/libwcs.a If you are building from source code obtained via anonymous ftp from the.tar.gz file, this section does not apply. For Mac OS X version 10.5 and later, an up to date version of GNU autoconf and GNU automake are part of the standard developer's environment. However, the libtool command has nothing to do with GNU libtool.

The GNU libtool is hidden as the commands glibtool and its companion glibtoolize. This version still needs patching. The workaround for these problems is detected by the autogen script. The script will apply the required patch.

Using the fink version of Qt, one might get the following output from configure. Checking for Qt.

Yes: QTCXXFLAGS=-I/sw/lib/qt3/include -DQTTHREADSUPPORT QTDIR=/sw/lib/qt3 QTLIBS=-L/sw/lib/qt3/lib -lqt-mt -lSM -lICE -L/usr/X11R6/lib -lX11 -lXext -lXmu -lXt -lXi QTUIC=/sw/lib/qt3/bin/uic QTMOC=/sw/lib/qt3/bin/moc checking correct functioning of Qt installation. Failure configure: error: Failed to find matching components of a complete Qt installation. Try using more options, see./configure -help. There are several reasons the configure script could fail to find Qt. The most frequent error is that Qt was not built with thread support.

One can look at the config.log file to see what the error really was. One can copy the last command from the config.log file and paste into the shell window to get more details, as was done below. Ki-mac06:/hippodraw-BUILD pfkeb$ g -L/sw/lib/qt3/lib -lqt-mt -lSM -lICE -L/usr/X11R6/lib -lX11 -lXext -lXmu -lXt -lXi -o bnvqtmain bnvqtmain.o mocbnvqttest.o /usr/bin/ld: Undefined symbols: typeinfo for QPtrCollection typeinfo for QObject collect2: ld returned 1 exit status In this case, Qt from fink was built with gcc 3.3 while configure was using gcc 4.0.1. HippoDraw can be built with just about any available version of gcc. The default compiler for Mac OS X 10.4 (tiger) is gcc 4.0.1. However, if you want to build HippoDraw using external libraries from fink that were compiled with gcc 3.3, you need to make that version of gcc the default compiler. This is done by issueing the following command as root.

gccselect 3.3 Beware that this changes the default compiler for all users and all future uses on the system. So after building HippoDraw you probably want to change it back by issueing the same command with `4.0' instead of `3.3'. A second problem is that the Boost library name is different than the default. On most UNIX systems (including Linux), gcc is part of the library name when the GCC compiler is used. On Mac OS X, even though GCC is the compiler, gcc is not part of the library name. Thus, you need to configure the Boost options something like this. ( cd./python/.libs; pydoc -w hippo ) problem in hippo - ImportError: dlopen(./hippomodule.so, 2): Library not loaded: libqt-mt.3.dylib Referenced from:./hippomodule.so Reason: image not found mv./python/.libs/hippo.html html/.

Mv: rename./python/.libs/hippo.html to html/./hippo.html: No such file or directory make3:. pydocs Error 1 make2:. install-am Error 2 make1:. install-recursive Error 1 make:. install-recursive Error 1 k It is because DYLDLIBRARYPATH is not set with the path to the Qt shared libraries. This can happen even if this enirnoment variable is set properly in the users environment.

Malformed Objects In I386 Ipp Library For Mac

Apparently, root user does not inherit this variable, even thought it inherits others (a feature?). The obvious workaround is to use sudo to become root and set the variable manually like this. Ki-mac03: pfkeb$ sudo su Password: ki-mac03: root# export TMP=/Volumnes/Work/pfkeb/HippoDraw-1.17.4 ki-mac03: root# export DYLDLIBRARYPATH=$WORK/qt/.libs:$WORK/lib/.libs ki-mac03: root# make install If the HippoDraw applications starts but you can not select its windows and the HippoDraw, then you have started HippoDraw incorrectly. This can happen either running as a stand-a-lone application or as a Python extension module.

For the stand-a-lone application, one must first build a Mac application by typing. CXXFLAGS='-isysroot /Developer/SDKs/MacOSX10.5.sdk -arch ppc -arch i386' LDFLAGS='-Wl,-syslibroot,/Developer/SDKs/MacOSX10.5.sdk -arch ppc -arch i386' /Users/pfkeb/hippodraw/configure -disable-dependency-tracking -disable-dependedncy-tracking is needed as desribed by Apple because the compiler can not create the dependency files when commpiling for mulitple architectures.

Thus building with universal binaries is not recommended for a developer's environment. The above addition to he configure options insures that the code is compiled for both Intel i386 and power PC architectures. However, the builting of Universal libraries will be broken. To fix it, one need to patch the generated libtool script in the build directory.

Malformed Objects In I386 Ipp Library For Mac Download

Apply the patch from the file libtool.patch located in the top level source directory like this.

I was using mac sweeper 3.0 disk wizard and got the following error. Applescript error file not in an order that can be processed (local relocation entries out of place):. Thank you Mark, I don't use iTunes so that fix does not bother me. I know that I have a ppc processor and not a i386. Does this mean I am using a program for my maintence that is wrong for my computer?

I would like to be able to use onyX but I can not get it to mount. I have used both apple's disk copy and Pacifist and neither one would mount that program. I also made sure I had the right version for my OS X2.8. Yes Mac Sweeper repairs permissions plus other things. Thank you for answering my inquire. Apple Footer. This site contains user submitted content, comments and opinions and is for informational purposes only.

Ipp Library

Apple may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Apple can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. All postings and use of the content on this site are subject to the.